Pre Cut Shim Set
Accushim Pre Cut Shim Sets offer ready-to-use SS304 stainless steel slotted shims in four footprint variants — A (2" x 2"), B (3" x 3"), C (4" x 4") and D (5" x 5") — so technicians can handle spacing, shimming and alignment jobs without cutting shim stock by hand. Each kit holds 10 shims of each thickness from .001" to .125", a practical workshop essential for bearing fits, gearbox and motor alignment, pump leveling, and general machinery setup across maintenance and production environments.
Accushim Pre Cut Shim Set Specifications
| Accushim Pre Cut Shim Set (SS304) | ||
|---|---|---|
| Parameter | Details | Typical Use |
| Brand | Accushim pre-cut slotted shim set | Ready-to-use shimming |
| Material | SS304 Stainless Steel | Corrosion resistant machinery and marine applications |
| Variants | A, B, C and D (difference is shim size) | Select to match the required shim footprint |
| Shim sizes | A: 2" x 2", B: 3" x 3", C: 4" x 4", D: 5" x 5" | Match studs, bolts and shaft footprints |
| Thicknesses | .001", .002", .003", .004", .005", .010", .015", .020", .025", .050", .075", .100", .125" | Fine to larger clearance adjustment |
| Quantity | 10 pcs per thickness (130 shims per set) | Workshop and maintenance kits |
| Supply note | Ready-to-use slotted kit with protective case | Rapid on-site shimming without cutting stock |
Buying Pre Cut Shim Sets for Fast, Accurate Alignment
Accushim Pre Cut Shim Sets save maintenance teams valuable time by providing a ready selection of SS304 stainless steel precision-cut shims for immediate use. Instead of cutting and deburring shim stock on site, technicians simply pick the required thickness from the set, making them ideal for quick bearing fit corrections, gearbox alignment, pump leveling, and machine installation jobs.
The slotted format in many pre-cut sets lets a shim be slid around studs, bolts and shafts without full disassembly, which is a major advantage during corrective maintenance and retrofits. Keeping an assortment on hand means the correct clearance can be established in minutes rather than waiting on fabricated parts.
Each Accushim kit is supplied in a chosen footprint size — Variant A with 2" x 2" shims, Variant B with 3" x 3", Variant C with 4" x 4", and Variant D with 5" x 5". The difference between the variants is purely the size of the shims: every variant contains 10 shims of each thickness from .001" through .125" in SS304, so pick the variant whose footprint matches your stud, bolt or shaft configuration.
Choosing the Right Shim Thickness from the Set
Each Accushim set contains 10 shims at every thickness from .001" to .125" (0.025mm to 3.18mm), so you can fine-tune a clearance in minutes. Measure the gap with feeler gauges, then select the single shim closest to your target; where a precise value is needed, combine a thicker shim with one thinner gauge rather than building a large stack. Keep the set on hand for quick bearing fits, pump leveling, gearbox alignment and alignment corrections during maintenance.
If your application needs continuous shim stock to cut custom sizes, compare this page with our SS304 Shim Stock, SS316 Shim Stock, Brass Shim Stock and Copper Shim Stock, or start from the Shim Stock pillar page.
The most important checks before ordering are the range of thicknesses you need, the shim sizes in the set, and whether the slotted format suits your shaft or bolt configuration. Confirming these points early ensures you select the right pre-cut shim set for fast, accurate results.
Similar Products
