Cable Pulling Grip – Double Eye
- • Material: High-Tensile Galvanized Steel Wire
- • Grip Style: Double Eye
- • Cable Diameter Range: 6mm – 150mm
- • Break Load: 3.40 – 42.70 kN
- • Mesh Type: Woven Wire Mesh Grip
Our double eye cable pulling grips are used where cables that have already been laid need to be pulled further without repositioning the cable winch, and for easy regulating and alignment operations. Woven from high-tensile galvanized steel wire, the two offset eyes let the cable pass through the grip for mid-span attachment. Larger diameters and longer lengths can be made to order.
Cable Pulling Grip – Double Eye Technical Specifications
| Cable Diameter (mm) | Lattice Length (mm) | Overall Length (mm) | Break Load (kN) | Break Load (Tons) |
|---|---|---|---|---|
| 6mm - 13mm | 600 | 700 | 3.40 | 0.35 |
| 13mm - 19mm | 600 | 700 | 6.80 | 0.69 |
| 19mm - 25mm | 600 | 700 | 6.80 | 0.69 |
| 25mm - 38mm | 1250 | 1350 | 11.70 | 1.19 |
| 38mm - 50mm | 1250 | 1350 | 16.00 | 1.63 |
| 50mm - 63mm | 1500 | 1600 | 16.00 | 1.63 |
| 63mm - 89mm | 1500 | 1600 | 21.30 | 2.17 |
| 89mm - 115mm | 1500 | 1650 | 34.90 | 3.56 |
| 115mm - 130mm | 1500 | 1700 | 34.90 | 3.56 |
| 130mm - 150mm | 1500 | 1700 | 42.70 | 4.35 |
Note: As a manufacturer, customer specifications can be made to suit individual requirements. Larger diameters and longer lengths can be made to order. Please specify the cable diameter when ordering.
Related Products
Cable Pulling Grip – Single Eye
Single eye wire mesh grips for end-of-cable pulls in 6–150mm cable diameters.
View Product
Cable Pulling Grips
View the full cable pulling grip range, sizing guide, and applications.
View Category